Preparations; Connections - Aiwa XR-M100 Operating Instructions Manual

PREPARATIONS

CONNECTIONS

Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 230 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord.
• Both speakers can be connected as L (Left) or R (Right).
1 Connect the speaker cord to the main unit.
The speaker cord with the white stripe should be connected
to 0 terminal and the black cord to the 9 terminal.
Right speaker
3
ENGLISH
2 Connect the supplied antennas.
Connect the FM antenna to FM 75
LW antenna to MW/LW LOOP terminals.
3 Connect the AC cord to an AC outlet.
• The Demo will begin when the AC cord is plugged into an
Left speaker
XR-M100
Speaker cord
FM antenna
N N A
A N T E
F M
7 5
X I A L )
W L O
( C O A
M W / L
AC outlet. See page 5 "DEMO" for details.
2
MW/LW antenna
2
FM antenna
terminals and the MW/
MW/LW antenna
O P
3
AC cord