Table of Contents
Advertisement
Power
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶ Deep Sleep Mode
The setting enables/disables the Deep S5 power saving mode. S5 is almost the
same as G3 Mechanical Off, except that the PSU still supplies power, at a mini-
mum, to the power button to allow return to S0. A full reboot is required. No previ-
ous content is retained. Other components may remain powered so the computer
can "wake" on input from the keyboard, clock, modem, LAN, or USB device.
** Advanced Resume Events Control **
▶ OnChip GbE/USB
This field specifies whether the system will be awakened from power saving
modes when the activity of USB devices or input signal of onchip LAN is detected.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before
power failure or interrupt occurred.
MS-98H7
3-21
Advertisement
Table of Contents
