Table of Contents
Advertisement
BIOS Setup
▶ Flow Control
Flow control is the process of managing the rate of data transmission
between two nodes. It's the process of adjusting the flow of data from one
device to another to ensure that the receiving device can handle all of the
incoming data. This is particularly important where the sending device is
capable of sending data much faster than the receiving device can receive
it.
▶ VT-UTF8 Combo Key Support
This setting enables/disables the VT-UTF8 combination key support for
ANSI/VT100 terminals.
▶ Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution
100x31.
▶ Putty Keypad
PuTTY is a terminal emulator for Windows. This setting controls the numeric
keypad for use in PuTTY.
▶ Legacy Console Redirection Settings
▶ Redirection COM Port
This setting selects a COM port to display redirection of Legacy OS and
Legacy OPROM Messages
▶ Resolution
In Legacy OS, this setting selects the Number of Rows and Columns
supported redirection.
▶ Redirect After POST
When Boot loader is selected, Legacy Console Redirection is disabled
before booting to legacy OS. When Always Enable is selected, Legacy
Console Redirection is enabled for legacy OS.
3-18
Advertisement
Table of Contents
