The alarm is not activated when the handset is
turned off at the alarm setting time.
The alarm is not activated when the set time
arrives during a call. Upon the end of the call,
the previously displayed screen or the home
screen is returned, and the alarm is activated.
When a set time arrives during another alarm
sounding, the alarm is delayed. When the
former alarm stops or the alarm duration has
elapsed, the delayed alarm restarts.
Touch panel operation when an alarm
■
sounds
The following touch operations are available.
End the alarm
Stop the alarm
(Snooze works)
Stopwatch
1
In the application screen, [Alarm/
Timer]/[StopWatch]
2
[Start]
: To record the lap time and split time: [Lap]
3
[Stop]
: To reset measured time and history: [Reset]
You can record up to 99 histories of lap time
and split time. When the number exceeds 99,
they are deleted starting with the oldest.
Measured time and history are reset by ending
the alarm/timer.
94
Convenient Functions
Keep touching [2] and
slide to the right following
the arrow on the screen
Keep touching [3] and
slide to the left following
the arrow on the screen
Timer
Activate an alarm tone or vibration after the
specified length of time passes.
1
In the application screen, [Alarm/
Timer]/[Timer]
2
Touch the set time/enter the
time/[OK]
: Touch [10sec]/[1min]/[5min]/[10min] to plus
10 seconds/1 minute/5 minutes/10 minutes
to the set time.
: To reset the set time to 00 minute 00 second:
[Reset]
3
[Start]
: To cancel the countdown: [Reset]
4
[Stop]
Notepad
Register frequently used phrases and use
them.
1
In the application screen,
[Notepad]/[Create]
2
Enter the body text/[Save]
Voice Recorder
You cannot record when the available space of
the microSD Card is less than 300 KB.
1
In the application screen, [Voice
Recorder]
: To switch recording mode: [Mode]