Sharp LYNX 3D SH-03C Docomo Instruction Manual page 120

As a result of inspection, when damage from
water exposure, condensation, sweat or other
liquids are found or when the internal circuit
board is damaged or deformed (Repairs may not
be possible when external connector terminal
(earphone/microphone terminal), LCD, etc. is
damaged or when a housing is cracked)
※Even when repairs are possible, repair charges
will be incurred because the warranty does not
cover such damage.
After the warranty period has expired
Charged repairs will be carried out upon request.
Replacement parts
Replacement parts (required to maintain the
functionality of the FOMA terminal) will be kept in
stock basically for 6 years following production.
However, note that there may be a case when
repair is not possible for the shortage of
replacement parts depending on the faulty part.
Repairs may be possible even after this period has
passed, depending on the type of malfunction.
Contact the number listed in "Repairs" (in Japanese
only) on the back of this manual for details.
IMPORTANT!
■
Never attempt to modify the FOMA terminal or its
accessories.
May cause fire, bodily injury or malfunction.
If your FOMA terminal has been modified
previously, it will only be accepted for the
repair as long as you agree that we restore the
FOMA terminal to its original state. However,
repairs may be refused depending on the
extent of the modification.
The following cases may be considered as a
modification.
･ Stickers are applied to the LCD or keys
118
Appendix/Index
･ Decorations are made to the FOMA terminal
with adhesive agent
･ Exterior parts are replaced with those which
are not standard DOCOMO product
Repairs for any malfunction or damage
caused by such modifications will incur fees,
even during the warranty period.
Do not peel off the model nameplate attached to
the FOMA terminal.
If the nameplate seal does not function as a
certification, repairs may be refused because
conformity to the standards cannot be
determined.
Information stored in your FOMA terminal, such
as the settings of various functions, may be
cleared or reset if your FOMA terminal is
damaged, repaired or mishandled.
If this occurs, please re-enter the information
or re-specify the settings.
When the FOMA terminal is repaired, MAC
address for Wi-Fi and Bluetooth address may be
changed regardless of the faulty part.
The following sections of the FOMA terminal
contain parts that generate magnetic waves.
Keep ATM cards and other objects likely to be
affected by magnetic waves away from the
FOMA terminal. Cards may become unusable.
Sections: speaker, mouthpiece
If inside of the FOMA terminal gets wet or
becomes moist, immediately turn off the power
and remove the battery pack. Then, visit a repair
counter. The FOMA terminal may not be repaired
depending on its condition.
技術基準適合認証品