Sharp LYNX 3D SH-03C Docomo Instruction Manual page 116

Make sure ringing time for Voice Mail
Service or Call Forwarding Service is
not set to "0 seconds".
Connection cannot be made ([(] does not
disappear even after moving to another place
or calls cannot be made/received even though
signal status is not bad)
Turn the power on again or attach the
battery pack or UIM again.
Depending on the signal type, even
though status is "inside the service
area" or "[!] (indicating signal status)
appears", making/receiving a call may
not be available. Move to another place
and call again.
Make sure the call restriction such as
Call blocking, etc. is not set.
In crowded place, heavy telephone/mail
traffic may be caused and makes it
difficult to get a connection. In such
case, [Please wait] appears and a busy
signal is played. Move to another place
or call again later.
Screen
■
Display is dark
Make sure Screen light on time is not
set short.
Make sure the brightness setting of
screen is not changed.
Make sure Automatic brightness of
screen is not enabled. Brightness of the
screen varies depending on the
surrounding light if the setting is
enabled.
114
Appendix/Index
Make sure VeilView is not set.
P. 54
Sound
■
P. 55
The other party's voice is not heard well or is
too loud during phone call
Make sure you did not change the
in-call volume.
Mail
P. 25 ■
P. 28
A mail is not automatically received
P. 32
Make sure Email check frequency in
Account settings of Email is not set to
[Never].
–
Camera
■
Still picture or moving picture shot by the
camera is blurred
Switch Focus Settings to [Photo AF] or
P. 61
[Fix Close Up] when shooting nearby
subject.
Make sure the camera lens is neither
misted up nor exposed to dirt.
–
1Seg
■
Cannot watch 1Seg
Make sure the handset is not outside
the area of a terrestrial digital TV
broadcasting service or in a place with
weak signal.
P. 62
Make sure Channel setting is complete. P. 87
P. 62
P. 62
P. 62
P. 24
P. 35
P. 78
P. 76
P. 86