Table of Contents
Advertisement
Quick Links
MZ-NE410/NE410CK
SERVICE MANUAL
Ver 1.1 2003. 03
US and foreign patents licensed from Dolby
Laboratories.
• SonicStage, OpenMG and the OpenMG
logo, MagicGate, Memory Stick and the
MagicGate Memory Stick logo,
Memory Stick and the Memory Stick
logo, Net MD and the Net MD logo are
trademarks of Sony Corporation.
• Microsoft, Windows, Windows NT and
Windows Media are trademarks or
registered trademarks of Microsoft
Corporation in the United States and /or
other countries.
• IBM and PC/AT are registered
trademarks of International Business
Machines Corporation.
• Macintosh is a trademark of Apple
Computer, Inc. in the United States and/
or other countries.
• MMX and Pentium are trademarks or
registered trademarks of Intel
Corporation.
• All other trademarks and registered
trademarks are trademarks or registered
trademarks of their respective holders.
• ™ and ® marks are omitted in this
manual.
Sony Corporation
9-877-029-02
2003C167800-1
Personal Audio Company
C 2003.03
Published by Sony Engineering Corporation
Photo: black model
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: cont inuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Recording and playback time (when
using MDW-80)
Maximum 160 min. in monaural
Maximum 320 min. in LP4 stereo
Revolutions
Approx. 380 rpm to 2,700 rpm
Error correction
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Coding
ATRAC (Adaptive TRansform Acoustic
Coding)
ATRAC3 — LP2/LP4
PORTABLE MINIDISC RECORDER
US Model
Canadian Model
Mexican Model
MZ-NE410/NE410CK
NEW
MT-MZN710-177
LCX-5R
SPECIFICATIONS
– Continued on next page –
MZ-NE410
Advertisement
Table of Contents
Related Manuals for Sony MZ-NE410CK
Summary of Contents for Sony MZ-NE410CK
- Page 1 • ™ and ® marks are omitted in this 44.1 kHz manual. Coding ATRAC (Adaptive TRansform Acoustic Coding) ATRAC3 — LP2/LP4 – Continued on next page – PORTABLE MINIDISC RECORDER Sony Corporation 9-877-029-02 2003C167800-1 Personal Audio Company C 2003.03 Published by Sony Engineering Corporation...
- Page 2 5 minutes each) 5 minutes each) 5 minutes each) When using a new Sony LR6 (size AA) “STAMINA” alkaline dry battery (produced in Japan). Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard. The numbers of tracks that can be checked out differs according to the computer’s operating environment.
-
Page 3: Table Of Contents
MZ-NE410/NE410CK TABLE OF CONTENTS CAUTION 1. SERVICING NOTES ............4 Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous ra- 2. GENERAL ................5 diation exposure. 3. DISASSEMBLY On power sources 3-1. -
Page 4: Servicing Notes
MZ-NE410/NE410CK SECTION 1 SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP System requirements BLOCK OR BASE UNIT The following hardware and software are required in order to use the SonicStage software for the Net MD. The laser diode in the optical pick-up block may suffer electro- Computer IBM PC/AT or Compatible static break-down because of the potential difference generated... -
Page 5: General
MZ-NE410/NE410CK SECTION 2 This section is extracted from instruction manual. GENERAL Looking at the controls Back of the recorder Front of the recorder A OPEN button C Battery compartment lid B Hand strap hole Use the hole to attach your own strap. The display window of the recorder A Display window D MENU button... -
Page 6: Disassembly
MZ-NE410/NE410CK SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. Disassembly Flow CASE (LOWER) In order to remove mechanism deck (MT-MZN710-177) , please remove MAIN board and panel (upper) section. PANEL (UPPER) SECTION MAIN BOARD LCD MODULE, MECHANISM DECK BUTTON (CONTROL) -
Page 7: Case (Lower)
MZ-NE410/NE410CK Note: Follow the disassembly procedure in the numerical order given. 3-2. Case (Lower) 2 two screws (M1.4) 1 two screws (M1.4) 3 Remove the case (lower) in the direction of the arrow. 3-3. MAIN Board 1 Remove two solders of the flexible board (over write head). -
Page 8: Panel (Upper) Section
MZ-NE410/NE410CK 3-4. Panel (Upper) Section 1 flexible board (CN872) 4 panel (upper) section 5 torsion spring (pop up-L) set chassis assy 3 two step screws torsion spring (pop up-L) 2 Slide the open slider in the direction of the arrow, and open the panel upper section. -
Page 9: Mechanism Deck (Mt-Mzn710-177)
MZ-NE410/NE410CK 3-6. Mechanism Deck (MT-MZN710-177) 1 two step screws (MD) 3 mechanism deck (MT-MZN710-177) The portion which projected is removed. 3-7. Set Chassis Assy 2 two screws (TP 1.7 × 2.5) 4 ground spring (USB) 5 set chassis assy 3 battery case 1 tension spring (lock) -
Page 10: Op Service Assy (Lcx-5R)
MZ-NE410/NE410CK 3-8. OP Service Assy (LCX-5R) 2 gear (SA) 5 screw (M1.4) 1 washer (0.8-2.5) 6 thrust detent spring 3 screw (M1.4) 8 Pull off lead screw. 4 rack spring 9 Opening the over write head toward the direction A , remove the OP service assy (LCX-5R) toward the direction B . -
Page 11: Holder Assy
MZ-NE410/NE410CK 3-9. Holder Assy 4 holder assy 2 Open the holder assy. 3 boss 1 convex portion 3 boss 3-10. DC Motor (Sled) (M602) 2 washer (0.8-2.5) 3 gear (SA) 4 two screws (M1.4) 1 Remove six solders of the motor flexible board. 5 DC motor (sled) (M602) -
Page 12: Dc Motor (Over Write Head Up/Down) (M603)
MZ-NE410/NE410CK 3-11. DC Motor (Over Write Head Up/Down)(M603), DC SSM18B Motor (Spindle) (M601) 1 Remove six solders of the motor flexible board. 2 tapping screw 3 motor cover 7 DC motor (over write head up/down) (M603) Note: Press-fit the gear (HA) up to the position of the DC motor (over write head up/down) (M603) as shown below. -
Page 13: Test Mode
MZ-NE410/NE410CK SECTION 4 TEST MODE Outline Operation in Setting the Test Mode • This set provides the Overall adjustment mode that allows CD • When the test mode becomes active, first the display check mode and MO discs to be automatically adjusted when in the test mode. is selected. - Page 14 MZ-NE410/NE410CK Configuration of Test Mode [VOL +] key: 100th place of item number [Major item switching] increase. [Test Mode $Display Check Mode%] [VOL --] key: 100th place of item number decrease. > x/CANCEL Press the > [Manual Mode] [VOL +] key: 10th place of item number Press the [Servo Adjustment]...
- Page 15 MZ-NE410/NE410CK [MENU] 5. The display changes a shown below each time the Overall Adjustment Mode key is pressed. Mode to adjust the servo automatically in all items. Normally, automatic adjustment is executed in this mode at the repair. • Address & Adjusted Value Display For further information, refer to “SECTION 5 ELECTRICAL Set LCD display ADJUSTMENTS”...
- Page 16 MZ-NE410/NE410CK • Description of Error Indication Codes Problem Indication code Meaning of code Simple display Description No error No error No error Illegal access target Adrs Attempt to access an abnormal address address was specified Servo system error High temperature Temp High temperature detected Focus error...
- Page 17 MZ-NE410/NE410CK Sound Skip Check Result Display Mode • Cause of Sound Skip Error This set can display the count of errors that occurred during the Cause of error Description of error recording/playing for checking. Sound error correction error • Setting Method of Sound Skip Check Result Display Stat Decoder status error Play...
-
Page 18: Electrical Adjustments
TDYS-1 R e s e t ! (Part No. : 4-963-646-01) • SONY MO disc available on the market 4. Press the x/CANCEL key to quit the manual mode, and • Digital voltmeter return to the test mode (display check mode). - Page 19 MZ-NE410/NE410CK • Adjustment Method of VC1_LOW (PB) • Adjustment Method of VC2_LOW (item number: 741) (item number: 743) Set LCD display Set LCD display A D * * A D * * ** : Adjusted value ** : Adjusted value 1.
- Page 20 MZ-NE410/NE410CK • Adjustment Method of REG1 • Adjustment Method of REG3_LOW2 (item number: 745) (item number: 748) Set LCD display Set LCD display A D * * A D * * ** : Adjusted value ** : Adjusted value 1. Connect a digital voltmeter to the TP1907 (REGO3) on the [VOL +] [VOL --] 1.
- Page 21 MZ-NE410/NE410CK • Adjustment Method of VREC_LOW (X2 speed) • Adjustment Method of VREC_HIGH (HEAD MOTOR) (item number: 751) (item number: 753) Set LCD display Set LCD display A D * * A D * * ** : Adjusted value ** : Adjusted value 1.
- Page 22 MZ-NE410/NE410CK Adju s tment/checking and Connection Location: MAIN BOARD (SIDE B) W601 W602 I C 6 5 1 IC601 TP1620(VREC) TP1909(REGO1) TP1915 IC901 IC852 IC501 ( T E S T ) IC801 W 9 0 3 BATT-(GND) TP1928(VCO1) TP1905(VOUT) TP1907(REGO3) TP1655...
- Page 23 MZ-NE410/NE410CK Power Supply Adjustment Auto Item Feed 5. Connect a digital voltmeter to the measuring points on the [VOL +] [VOL MAIN board, and adjust the voltage with the Note: This mode is available to perform the temperature correction and key.
- Page 24 MZ-NE410/NE410CK Ver 1.1 2003.03 9. Check that the laser power meter reading is 4.95 ± 0.59 mW. Laser Power Check 10. Press the key, and set the laser MO (X4 speed) write > Note: If result of measurement of the laser power does not satisfy the specification, either replace the OP (optical pick-up unit) or check check mode (item number 014).
- Page 25 MZ-NE410/NE410CK • Adjustment Method of CD and MO Overall Adjustment 8. If OK through the MO overall adjustments, press the Mode key to return to the test mode and terminate the x/CANCEL 1. Set the test mode (see page 13). overall adjustment mode.
- Page 26 MZ-NE410/NE410CK 2. MO overall adjustment items Item No. Description Item No. Description Focus gain adjustment VC,VR power supply H/L selection Tracking gain adjustment R_GRV setting . servo OFF TWPP gain adjustment Low reflection electrical offset adjustment TWPP offset adjustment 1 Laser ON .
- Page 27 MZ-NE410/NE410CK Remuse Clear Perform the Resume clear when all adjustments completed. • Resume Clear Setting Method 1. Select the manual mode of the test mode, and set item number 043 (see page 14). Set LCD display # # # S 0 0 ### : Address 2.
- Page 28 MZ-NE410/NE410CK Rewriting the Patch Data at Replacement of Main Board This set requires the patch data in the nonvolatile memory (IC852) to be rewritten using the application, when the MAIN board was replaced. Cau t ion: The application that meets the microcomputer version in this set must be used when rewriting the patch data. Rewriting the patch data using the application not suitable for the microcomputer version could cause the set to malfunction.
- Page 29 MZ-NE410/NE410CK 5. Confirm that the model and version indicated on the title bar coincide with the codes displayed in the Device Name block and the Version block in the window. 6. Click the [Write + Read] button. The patch data writing and the verify processing will be executed automatically in the following order: 1) Writing to patch area (front area) 2) Writing to patch area (reverse area) 3) Verifying patch area (front area)
- Page 30 MZ-NE410/NE410CK • Confirmation of contents of the patch data rewrited 1. Click the [READ] button to confirm the contents of the patch data rewrited. 2. The application reads out the front and reverse patch areas and displays the results in the edit box. Confirm that the upper column coincides with the lower column as the following window.
- Page 31 MZ-NE410/NE410CK • Disconnecting the USB cable Disconnect the USB cable as the following procedure after rewriting the patch data and confirmation. Note : When the following procedure is not completed but USB cable is extracted, the application does not recognize the set at exchanging of the set. 1.
- Page 32 MZ-NE410/NE410CK Rewriting the NV values Cau t ion: The application that meets the microcomputer version in this set must be used when rewriting the NV values. Rewriting the NV values using the application not suitable for the microcomputer version could cause the set to malfunction. For a checking method of the microcomputer version, see “SECTION 4 TEST MODE”...
- Page 33 MZ-NE410/NE410CK 5. Confirm that the model and version indicated on the title bar coincide with the codes displayed in the Device Name block and the Version block in the window. 6. Click the [Write + Verify] button. The NV values writing and the verify processing will be executed automatically in the following order: 1) Writing to Servo 1 area (front area) 2) Writing to Servo 1 area (reverse area) 3) Writing to Power Supply 1 area (front area)
- Page 34 MZ-NE410/NE410CK 7. The operation will terminate with “Compere OK” given to all areas. If “Compere NG” is given to any area, the nonvolatile memory will be faulty. 8. Click the [USB DISCONNECT] button.
- Page 35 MZ-NE410/NE410CK 9. Confirm that the window becomes as shown below where the [Write + Verify] button is inactive. 10. Disconnect the USB cable from the personal computer and the set.
- Page 36 MZ-NE410/NE410CK MEMO...
-
Page 37: Diagrams
MZ-NE410/NE410CK SECTION 6 DIAGRAMS 6-1. Block Diagram SYSTEM CONTROLLER SYSTEM CONTROLLER HP AMP DIGITAL SIGNAL PRCESSOR RF AMP DIGITAL SIGNAL PRCESSOR POWER AMP IC371 IC501 IC801(1/2) IC801(2/2) IC901 REGO1 UNREG OPTICAL PICK-UP REGO1 SDO0 DVCC AOUT L L IN IFVDD0 REGO1 DATA BLOCK... -
Page 38: Note For Printed Wiring Board And Schematic Diagrams
MZ-NE410/NE410CK 6-2. Note For Printed Wiring Board And Schematic Diagrams • Waveforms Note on Printed Wiring Board: Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF • X : parts extracted from the component side. IC501 9 (RFO)(TP1517) IC601 4 (CLK) IC901 yd (CLK) -
Page 39: Printed Wiring Board - Main Board (Side A)
MZ-NE410/NE410CK 6-3. Printed Wiring Board – MAIN Board (Side A) – :Uses unleaded solder. MAIN BOARD (SIDE A) • Semiconductor Location Ref. No. Location D171 D271 D606 D607 D903 IC371 IC701 Q501 Q603 Q604 Q605 S803 L C X - 5 R (OPEN/CLOSE) IC371 IC701... -
Page 40: Printed Wiring Board - Main Board (Side B)
MZ-NE410/NE410CK 6-4. Printed Wiring Board – MAIN Board (Side B) – :Uses unleaded solder. MAIN BOARD (SIDE B) SWITCH OVER WRITE HEAD & LCD MODULE W601 W602 • Semiconductor Location IC651 Ref. No. Location IC601 D371 D-10 D605 D652 (VREC) D653 D654 D851... - Page 41 MZ-NE410/NE410CK 6-5. Schematic Diagram – MAIN Board (1/4) – • • See page 38 for Waveforms. See page 46 and 48 for IC Block Diagrams. C630 C631 47 4V Q605 CPH5614 D606 MA2YD1700LS0 C632 100p D607 MA2YD1700LS0 Q604 W602 MCH6616-TL-E W601 TP1616 R612...
-
Page 42: Schematic Diagram - Main Board (1/4)
MZ-NE410/NE410CK 6-6. Schematic Diagram – MAIN Board (2/4) – • See page 38 for Waveform. • See page 45 and 47 for IC Block Diagrams. C513 C524 0.022 TP1539 C517 0.01 TP518 R511 CN501 C535 C526 C718 C720 TP1504 0.047 TP1507 TP1506 TP1711... -
Page 43: Schematic Diagram - Main Board (3/4)
MZ-NE410/NE410CK 6-7. Schematic Diagram – MAIN Board (3/4) – • See page 38 for Waveforms. R821 R822 R824 220k 470k FB802 R826 C819 2.2k R837 R858 C841 R835 X802 1000p R827 4.7k 48MHz 4.7k R851 R828 R825 TP1846 TP1847 TP1848 TP1849 TP1808 TP1850... -
Page 44: Schematic Diagram - Main Board (3/4)
MZ-NE410/NE410CK Ver 1.1 2003.03 6-8. Schematic Diagram – MAIN Board (4/4) – • • See page 38 for Waveforms. See page 45 for IC Block Diagrams. J304 W901 R312 CN872 TP1882 TP1883 C399 TP1884 TP1885 D271 TP1886 02DZ2.4-Z(TPH3) TP1887 D171 02DZ2.4-Z(TPH3) TP1888 FB803... -
Page 45: Ic Block Diagrams
MZ-NE410/NE410CK • IC Block Diagrams IC371 NJM2776RB2(TE2) OUT R OUT L IN R IN L STB_TC BIAS X_MUTE VREF VREF AMP IC501 SN761058ZQLR AVCC PEAK/ OFTRK T-ON BOTM 42 FE ABCD 41 ABCD 40 RFI A GND 39 ASSY OFC-C1 38 CIG TPP/WPP OFC-C2... - Page 46 MZ-NE410/NE410CK IC601 XPC18A22AEPR2 VC2 VG OUTPUT SW OUTPUT SW CHARGE CHARGE PUMP 1 PUMP 2 VC VG DC IN HI-BRIDGE CHARGE PRE DRIVER PRE DRIVER MONITOR VREF VREF X2/X4 BATM BUFFER DC IN CVREF CONTROL CONTROL CHARGE CHGSW DW BT CONTROL DW TP DC IN...
- Page 47 MZ-NE410/NE410CK IC701 SC111258EPR2 48 47 46 45 52 51 3Phase BIAS control 3Phase control PGNDW2 VG VC PGNDW1 VMVW2 3Phase Pre driver WMVW1 3Phase Pre driver PGNDUV2 PGNDUV1 35 UO2 VMU2 VMR2 VMU1 VG VC VMR1 H-BRIDGE PGND2 DRIVER H-BRIDGE PGND1 DRIVER VMF2...
- Page 48 MZ-NE410/NE410CK IC901 SC901580EPR2 (HP AMP) AMP1 CONTROL BANDGAP FFCLR1 48 VREF REFERENCE XWAKE4 47 REGC3 REF1 XWAKE3 46 REGC2 REF2 REF3 XWAKE2 45 REGC1 REF4 REF5 XWAKE1 44 REGI1 SERIES PASS REGULATOR1 REF3 VRMC 43 REGO1 FFCLR 42 VC2 SERIES PASS REGULATOR2 REF4 41 REGO2...
-
Page 49: Ic Pin Function Description
MZ-NE410/NE410CK 6-9. IC PIN FUNCTION DESCRIPTION • IC801 CXD2680-204GA (SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description OSCI Resonator connection terminal for the system clock (22.5792MHz) OSCO Resonator connection terminal for the system clock (22.5792MHz) VREFL Reference voltage terminal connected to the capacitor (for the built-in D/A converter L-CH) AOUTL Built-in D/A converter L-CH signal output AOUTR... - Page 50 MZ-NE410/NE410CK Pin No. Pin Name Description ADDT Data input from the external A/D converter (fixed at “L” in this set) KRCK L/R sampling clock (44.1KHz) output to the external A/D converter Not used (open) XBCK Bit clock (2.8224MHz) output to the external A/D converter Not used (open) FS256 11.2896MHz clock output Filter cutoff control signal output Not used (open)
- Page 51 MZ-NE410/NE410CK Pin No. Pin Name Description BATT_CTL Control signal output for the voltage step up circuit in the external battery case Not used (open) VREC_CTL VREC voltage control signal output Not used (open) XRST_CHG_IC Reset signal output to the battery charge control IC Not used (open) 114, 115 PD_S0, 1 PD IC mode changeover signal output to the optical pick up...
- Page 52 MZ-NE410/NE410CK Pin No. Pin Name Description HIDC_MON HIGH DC voltage monitor input (A/D input) Not used (fixed at “H”) WK_DET Set key WAKE detection signal input BATT_MON External battery voltage monitor input Not used (fixed at “H”) HALF_LOCK_SW Open button detection switch input (A/D input) “L” : the open button is pressed 16 9 RMC_KEY Key input (A/D input) from the remote commander...
- Page 53 MZ-NE410/NE410CK Pin No. Pin Name Description — DRAM chip select terminal Not used (open) — DRAM clock terminal Not used (open) — DRAM clock enable terminal Not used (open) UDQM — DRAM byte mask terminal Not used (open) LDQM — DRAM byte mask terminal Not used (open) DVDD0 —...
- Page 54 MZ-NE410/NE410CK Pin No. Pin Name Description FVDD0 — Power supply terminal (for the built-in flash memory) FVSS0 — Ground terminal (for the built-in flash memory) 301, 302 DVDD5, 6 — Power supply terminal 303, 304 DRAMVDD3, 4 — Power supply terminal (for DRAM) MSAK —...
-
Page 55: Exploded Views
MZ-NE410/NE410CK SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • Color Indication of Appearance Parts The components identified by mark 0 or have some differences from the original one. Example: dotted line with mark 0 are critical for safety. •... -
Page 56: 7-2. Chassis Section
MZ-NE410/NE410CK 7-2. Chassis Section mechanism deck section-1 (MT-MZN710-177) not supplied MAIN board section Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-237-072-11 SCREW (MD), STEP 3-250-692-01 SPRING (USB), GROUND 3-238-876-07 SCREW (M1.4), TOOTHED LOCK 3-318-382-91 SCREW (1.7X2.5), TAPPING X-3382-642-1 CHASSIS (5207) ASSY, SET 3-237-080-01 SLIDER, OPEN 3-237-075-01 SPRING (POP UP-L), TORSION... -
Page 57: 7-3. Main Board Section
MZ-NE410/NE410CK Ver 1.1 2003.03 7-3. MAIN Board Section Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-246-247-01 CASE, BATTERY A-3347-624-B MAIN BOARD, COMPLETE (US) 3-237-073-01 TERMINAL BOARD (+), BATTERY A-3347-627-B MAIN BOARD, COMPLETE (EXCEPT US) 3-237-074-01 TERMINAL (-), BATTERY... -
Page 58: Mechanism Deck Section-1 (Mt-Mzn710-177)
MZ-NE410/NE410CK 7-4. Mechanism Deck Section-1 (MT-MZN710-177) mechanism deck section-2 (MT-MZN710-177) not supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks X-3381-219-3 HOLDER ASSY 4-222-208-01 GEAR (SB) 3-224-779-02 SPRING, THRUST DETENT 3-043-237-02 BEARING (N) 3-225-996-01 SCREW (M1.4)(EG),PRECISION PAN 4-222-203-02 SCREW, LEAD 0 309 3-244-823-01 GEAR (SA) -
Page 59: Mechanism Deck Section-2 (Mt-Mzn710-177)
MZ-NE410/NE410CK 7-5. Mechanism Deck Section-2 (MT-MZN710-177) M602 M603 supplied M601 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-225-278-12 SCREW, TAPPING 3-235-839-02 LEVER (RACK) 3-235-838-02 COVER, MOTOR 3-338-645-31 WASHER (0.8-2.5) 3-235-836-01 GEAR (HB) 4-222-222-01 GEAR (RACK) 3-222-544-01 GEAR (HA) A-3174-089-A SHAFT BLOCK ASSY, SUB 3-235-835-01 GEAR (HC) -
Page 60: Electrical Parts List
MZ-NE410/NE410CK Ver 1.1 2003.03 SECTION 8 MAIN ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms. please include the board name. specified in the diagrams or the components METAL: metal-film resistor used on the set. - Page 61 MZ-NE410/NE410CK MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C812 1-125-837-91 CERAMIC CHIP 6.3V C985 1-125-777-11 CERAMIC CHIP 0.1uF 10.00% 10V C813 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V < CONNECTOR > C814 1-125-891-11 CERAMIC CHIP 0.47uF 10.00% 10V C815...
- Page 62 MZ-NE410/NE410CK Ver 1.1 2003.03 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < LINE FILTER > R655 1-218-953-11 RES-CHIP 1/16W R656 1-218-985-11 RES-CHIP 470K 1/16W LF952 1-416-405-21 FERRITE R657 1-218-990-11 SHORT CHIP < TRANSISTOR > R658 1-218-961-11 RES-CHIP 4.7K...
- Page 63 MZ-NE410/NE410CK Ver 1.1 2003.03 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R858 1-218-990-11 SHORT CHIP 8-954-008-92 RECEVER, EAR (MDR-E808LP/C SET) R860 1-216-864-11 METAL CHIP 1/16W (EXCEPT US) R861 1-218-990-11 SHORT CHIP X-3383-268-1 CD-ROM (APPLICATION) ASSY (US, CND) R862 1-218-989-11 RES-CHIP 1/16W...
- Page 64 MZ-NE410/NE410CK REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003.02 2003.03 Mexican models of NE410 and NE410CK addition...