Sony MZ-N1 OpenMG Jukebox NOTES on installing & operating Operating Instructions Manual page 55

• Storing phrases from a previously
labeled track, group, or disc:
You can store an existing track, group,
or disc name as a phrase.
• Inputting and storing phrases:
You can store frequently used phrases in
advance, and then retrieve and use them
when labeling a track, group, or disc.
Storing phrases while labeling
a track, group, or disc
On the recorder
1
Follow steps 1 to 7 of "Labeling
recordings" (page 51) to enter a
phrase.
2
After entering the phrase, press
CANCEL to remove the cursor from
the character palette to the letter input
area
3
Press END SEARCH for 2 seconds or
more.
"Entry!" appears in the display and
the cursor flashes after the phrase you
just stored.
4
If you continue labeling operation, do
steps 5 to 7 of "Labeling recordings"
(page 51).
On the remote control
1 Follow steps 1 to 6 of "On the remote
control" in "Labeling recordings" (page 52)
to enter a phrase.
2 After entering the phrase, press X for 2
seconds or more.
3 If you continue labeling operation, do steps 5
to 6 of "On the remote control" in "Labeling
recordings" (page 52).
Storing phrases from a previously
labeled track, group, or disc.
On the recorder
1
Follow steps 1 and 2 of "Relabeling
recordings" (page 53) and display the
track, group, or disc name that
contains the phrase that you want to
store.
2
Press ./> repeatedly to move
the cursor to the right of the phrase.
3
Press END SEARCH for 2 seconds or
more to store the phrase.
On the remote control
1 Follow steps 1 and 2 of "On the remote
control" in "Relabeling recordings"
(page 54) and display the track, group, or
disc name that contains the phrase that you
want to store.
2 Pull and turn the control towards VOL + or
VOL – to move the cursor to the right of the
phrase.
3 Press X for 2 seconds or more to store the
phrase.
Entering and storing phrases
On the recorder
1
Press the jog dial.
2
Turn the dial until "EDIT" flashes in
the display, and then press to enter.
3
Turn the jog dial until "Name Bank"
flashes in the display, and then press
to enter.
4
Follow steps 5 to 7 of "Labeling
recordings" (page 51) to enter a
phrase and then press the jog dial for
2 seconds or more.
"Entry!" appears in the display and
the phrase is stored.
55