Table of Contents
Advertisement
85017_2.book Page 7 Monday, July 16, 2001 3:05 PM
Upgrade Instructions
Calibration
Calibration cycle
This section replaces the relevant chapter in the standard Raypilot
handbook. It allows the user to configure the system to make full use
of the Workboat operating mode.
Note: The boat's compass and the fluxgate compass will not agree
until the calibration procedure has been carried out (refer to the
RayPilot 650 Owner's Handbook for details).
The following table lists the calibration options available when the
system is configured for Workboat mode. Details of each function are
described in the paragraphs that follow this list.
For calibration details of this system in the standard operating mode,
please refer to the main handbook.
•
Vessel type
•
Calibration lock
•
Rudder gain (high level)
•
Rudder gain (low level)
•
Rate level
•
Rudder offset (Align rudder)
•
Rudder limit (high level)
•
Rudder limit (low level)
•
Default cruise speed
•
Off course limit
•
AutoTrim level
•
Power steer type
•
Drive type
•
Rudder damping (deadband)
•
Variation
•
AutoAdapt
•
Latitude
•
Response level
•
Turn rate
•
Speed threshold
•
Rudder datum selection
•
Auto Workboat Mode selection
7
Advertisement
Table of Contents
