Storing The Station Names; Station Memo; Locating A Station By Name - List-Up - Sony MDX-C670 Operating Instructions Manual

Storing the station names

—Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
current station appears in the display. You can
store up to eight characters for each station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (LIST) for two seconds.
F M 1
________
SUR EQ
3
Enter the characters.
1 Rotate the dial clockwise direction to
select the desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
F M 1
W_______
SUR EQ
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
F M 1
W_______
SUR EQ
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to normal radio reception,
press (LIST) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
Displaying the station name
Press (DSPL) during radio reception.
F M 1
3 WRKISS
SUR EQ
Each time you press (DSPL), the item
changes as follows:
z Station name*
* If the station name is not stored, "NO Name"
appears in the display for one second.
Erasing the station name
1
Tune in any station and press (LIST) for
two seconds.
2
Press (DSPL) for two seconds.
"Delete" and the station name appear in the
display.
3
Rotate the dial to select the name you
want to erase.
4
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press (LIST) for two seconds.
The unit returns to normal radio reception
mode.
Locating a station by
name
— List-up
1
Press (LIST) momentarily.
The name assigned to the current station
appears in the display.
L S T
3 WRKISS
SUR EQ
ENTER
2
Press (LIST) repeatedly until you find the
desired station.
3
Press (5) (ENTER) to tune in the desired
station.
Note
After the station name or frequency has been displayed for
five seconds, the display goes back to normal mode. To turn
off the display, press (DSPL).
z Frequency z Clock
EN
9