Boundary Conditions - Siemens SINUMERIK 840Di sl Function Manual

Boundary conditions

Availability/scope of performance
The scope of performance provided by the "Synchronized actions" function package
depends on the following:
• The type of SINUMERIK control system
• The availability of functions that can be initiated by "Actions":
The performance of control systems and their variants as well as functions supplied as
options are described in catalogs specific to the SW version:
References:
/BU/ Ordering documentation, Catalog NC60 and NC61
/LIS1/ Lists (Book1)
/LIS2/ Lists (Book1)
Further, the functions of the synchronized actions depend on the list of synchronized actions
- system variables that can be read/changed - including machine and setting data (also
dependent on the SW release). System variables that may be used in conjunction with
specific SW versions are described in:
References:
/PGA1/ Parameter Manual System Variables (valid for the particular SW release)
Extensions in SW 4
The following extensions have been introduced with SW 4:
• Diagnostic facilities for synchronized actions
• Availability of additional real-time variables
• Complex conditions in synchronized actions
Synchronized actions
Function Manual, 11/2006, 6FC5397-5BP10-2BA0
– Hardware
– SW (export/standard versions)
– Standard functions
– Functions that are available as options
– Basic arithmetic operations
– Functions
– Indexing with real-time variables
– Access to setting and machine data
– Logic operators
3
125