Service Navigation; External Hdd (Usb-Hdd) - Panasonic DMR-UBS80EG Service Manual

3 Service Navigation

3.1.

External HDD (USB-HDD)

Please use a confirmed USB-HDD.
For the latest information on confirmed USB-HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
• Certain non-confirmed USB-HDDs cannot be used with this unit.
• If a problem occurs with the USB-HDD, please contact the manufacturer of the device.
3.1.1. Connecting the USB-HDD
3.1.2. Disconnecting the USB-HDD
Please use the following procedure to disconnect.
Disconnecting without following this procedure may result in the loss of recorded content from the USB-HDD or the internal HDD.
1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Disconnection", then press [OK].
7. Select "Yes", then press [OK].
8. Disconnect the USB-HDD from this unit.
3.1.3. Registering the USB-HDD
3.1.3.1. Registering the USB-HDD
• If you use a USB-HDD with this unit, the USB-HDD must first be registered on this unit.
- Registering of a USB-HDD will format the USB-HDD and all the content already recorded will be deleted.
- Up to eight USB-HDDs can be registered on this unit.
- Registered USB-HDDs cannot be used with devices other than this unit.
• If the registering screen appears when connecting the USB-HDD, go to step 7.
1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Registration", then press [OK].
7. Select "Yes", then press [OK].
• If you have already registered eight USB-HDDs, it will be necessary to delete one or more of them before registering a
new USB-HDD.
The message screen appears:
1. Select "Yes", then press [OK].
2. Select the USB-HDD to cancell, then press [OK]. The confirmation screen appears.
3. Select "Yes", then press [OK].
Connect this unit with optional USB-HDD.
• Only one USB-HDD (For recorded titles) can be connected
at the same time.
• Do not connect additional HDDs using a USB hub.
• For details about connection method, refer to the
instructions supplied with the USB-HDD.
9