Panasonic DMR-UBS80EG Service Manual page 42

7.1.2. Special Modes Setting
Mode name
Rating password The audiovisual level setting password is
initialized to Level 8.
Service Mode Setting every kind of modes for servicing.
*Details are described in "7.1.3. Service
Mode at a glance".
BD-ROM history cleaning "Persistent Storage" of BD-ROM standard is
cleaned.
Screen display: [The player's history data
has been cleared.] is displayed for 5
seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is
ON, execute "Forced Power-off" after
releasing Timer REC or EXT-LINK.
Item
Description
FL display
1.
2.
3.
2.
3.
4.
1.
2.
3.
1.
2.
Display in P-off mode.
42
Key operation
Front Key
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "03 VL" is displayed on the
unit's display.
3. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
1. Turn the power off.
2. Press the [5] [9] and [R] button
simultaneously for 5 seconds, then
"70 RET" is displayed on FL.
3. Press the [ ] button to select
until "80 SRV" is displayed on FL.
4. Press the [OK] button.
*The command is transmitted by
attached remote control.
1. When the power is on, disc is not
in tray, press and hold [6], [7] and
[Y] on the remote control at the
same time for more than 5 seconds.
- "50 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "51 NOP" is displayed on
the unit's display.
3. Press and hold [STOP] on the
remote control until "52 BRE" is
displayed on the unit's display.
4. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
1. While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "06 FTO" is displayed on
the unit's display.
3. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Press [Power] key more than 4
seconds.