Panasonic DMR-UBS80EG Service Manual page 10

8. When the registering is complete, message screen appears.
Press [OK].
9. The confirmation screen appears.
Press [OK].
3.1.3.2. Settings for USB-HDD
Delete all titles
Delete all titles on the USB-HDD.
- Delete does not work if one or more titles are protected.
1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Management", then press and hold [OK] for 3 seconds.
7. Select "Delete all titles", then press [OK].
8. Select "Yes" and press [OK].
9. Select "Start" and press [OK].
10. The confirmation screen appears.
Press [OK].
Format USB-HDD
Formatting deletes all contents, and they cannot be restored.
Check carefully before proceeding.
1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Management", then press and hold [OK] for 3 seconds.
7. Select "Format USB-HDD", then press [OK].
8. Select "Yes" and press [OK].
9. Select "Start" and press [OK]. Then formatting starts.
10. Press [OK] after formatting completed.
3.1.3.3. To cancell all USB-HDD registrations
• If you register a USB-HDD, all the content already recorded on the USB-HDD will be deleted.
• It is not possible to play back the content on the USB-HDD whose registration has been cancelled.
• You can check the registration number of the USB-HDD on the DIRECT NAVIGATOR.
Cancellation of all USB-HDD Registrations
This function cancells the registrations of all the USB-HDDs registered on this unit.
Only do this if you are going to dispose of this unit.
- Before operation, perform "3.1.2. Disconnecting the USB-HDD" and remove the USB-HDD.
- It is not possible to play back the content from a USB-HDD whose registration has been cancelled.
1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "Cancellation of all USB-HDD Registrations", then press and hold [OK] for 3 seconds.
7. Select "Yes", then press [OK].
8. The confirmation screen appears.
Select "Yes", and press [OK].
9. When the cancellation is complete, message screen appears.
Press [OK].
10