Panasonic DMR-UBS80EG Service Manual page 48

7.1.3. Service Modes at a glance
Information necessary for service can be displayed.
Service mode setting:
1. Turn the power off.
2. Press the [5] [9] and [RED] button simultaneously for 5 seconds, then
3. Press the [ ] button to select until
4. Press the [OK] button.
5. It is displayed on FL as
6. The command is transmitted by attached remote control.
Remote Control:
[R] = [RED]
[Y] = [YELLOW]
[B] = [BLUE]
Method of making clear service mode: Press the power button (power off).
The display of information to each command is as follows.
NOTE:
Do not use it excluding the designated command.
Mode name
Release Items Item of Service Mode executing is
cancelled.
Error Code Display Last Error Code of U/H/F held by Timer is
displayed on FL.
*Details are described in "7.1.1. Self-
Diagnosis Functions".
80 SRV is displayed on FL.
" "
WELCOME-->SERV .: It is shown to have entered the service mode.
" "
Item
Description
70 RET is displayed on FL.
" "
FL display
If any error history does not exist,
[F00] is displayed.
48
Key operation
(Remote control key)
Press [0] [0] in service mode.
Press [0] [1] in service mode