Start Test; Bert Results; Elapsed Time & Nx64 Details - Greenlee DataScout 10G User Manual

If a test profile name is not saved in the Test Profile field, the test configuration will not
be saved. The current test configuration will persist until you change the test type or
power cycle the test unit. If you neglect to save a test profile and desire to do so, re-
turn to the test view you are on prior to initiating another test or changing the configura-
tion, then press the Test Profile button and save the profile.

Start Test

To start a test, press the START TEST button. The test set will begin transmitting the
initial test pattern selected in the previous view and display live test results.

BERT Results

There are four areas of note in the BERT results view:
1. Elapsed Time & Nx64 Details
2. Test Pattern Selection, Error & Alarm Injection
3. Stop & Reset Test
4. Live View Test Results
Elapsed Time & Nx64 Details
When the test set is in continuous mode the elapsed time counter will increment to
show the total elapsed time the test has been running. When in timed mode both
elapsed and remaining time is displayed.
Figure 104 - Test Profile Field
1 4
2
3
Figure 105 - BERT Test Result View
User's Manual
97
DataScout 10G