Sony CRX10U User Manual page 22

Note
• See "Using the Battery Pack" on page 15 for details about installing and charging the
battery pack.
• To operate from AC power, connect the CRX10U to the AC adapter, and the adapter to
an outlet.
CAUTION
• Use only the supplied AC-CRX10U AC adapter and power cord.
• Use only the supplied NP-F550 battery pack.
2
Load a disc (music CD).
See "Loading a Disc" on page 19 for details.
3
Move the remote control knob to the N • > side.
Playing starts with a confirming beep in the headphones.
To adjust the volume:
Press VOL +/–. The volume level appears on the remote control
display during adjustment.
• Headphone volume can also be adjusted by the volume control on the drive, so
• Sliding the HOLD switch on the remote control in the direction of the arrow
22
HOLD
(inhibit inadvertent operation) switch
Note
you can adjust volume using both the VOL +/– control on the remote control and
the control on the drive.
disables the other controls, to prevent accidental operation.
Volume control
Display
VOL +/–