Busy Indicator; Power Switch; Volume Control - Sony CRX10U User Manual

6 BUSY Indicator

This indicator lights orange while
the drive is operating.
7 AVLS (Auto Volume Limiter
System) Switch
When listening to music CDs, this
switch can be set to the LIMIT
position to protect against excessive
volume levels and suppress sound
leakage, pressure on the eardrums
and other hazards to hearing.

8 POWER Switch

This switch turns the drive on and
off, and turns battery charging
(CHG) on.

9 Volume Control

This control adjusts the volume at
the headphone jack.
q; i /REMOTE Jack
The RM-CRX10 headphone remote
control connects here.
qz Eject Button
Press this button to open the top
cover.
Important
The CRX10U has an electronic eject
mechanism to prevent the top cover from
being opened accidentally while the drive is
operating, so the eject button cannot open the
top cover when the drive is turned off.
Furthermore, even when the power is on,
depending on the status of the currently
running application, the top cover might not
open for a few seconds after the eject button
is pressed.
If pressing the eject button does not open the
top cover (when not writing a disc), press the
manual eject lever (on the bottom of the
drive) in the direction indicated by the arrow
to open the top cover.
qs HOLD (inhibit inadvertent
operation) switch
Slide this switch in the direction of
the arrow to enable the Hold state,
which prevents the top cover from
opening when the eject button is
pressed.
qd Manual Eject Lever (bottom of
drive)
While the drive is off, push this
lever in the direction of the arrow
to open the top cover.
13