Imei Check; Visual Mechanical Inspection - Blackberry DTEK 50 STH100-1 Service Manual

L1 Service Manual
If IMEI sicker (commercial label) is lost but the phone can be power on, input "*#2886#" at dial mode
3.
and then select "MANU" "Traceability" to check date code, IMEI info, CU-REF, PTH(PTM), etc.
If the phone can't power on, please read data code by using Sugar tool. Please refer to SW download
process in term 3 for details.

2.8 IMEI Check

1) Power on the handset, enter *#06#
2) If the IMEI sticker in the back casing is not lost:
We should make sure that the IMEI number must be the same with the one on the IMEI sticker, if not,
it's out of warranty policy.
2.9

Visual Mechanical inspection

Mechanical warranties check items:
1) Corrosion

Corrosion on the USB connectors, SIM connectors, and other metal surfaces
2) Hole

Holes (Diameter > 1mm) on any surface, including front casing, decorate frame, battery cover,
LCD Lens, keypad.
3) Bump

Bumps (Diameter>1mm) on any surface, including the front casing, decorate frame, battery cover,
LCD Lens, keypad
4) Scratch (length > 3mm)

Scratches on any surface, including the front casing, furnished frame, battery cover, LCD Lens,
keypad
5) Distortion

Bend, twisted or crushed on the h/s, cover/casing or connectors
6) Broken
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Neon PRD62980/62981 Level 1 Service Manual
TCL
Communication Ltd.
Page
14/30