Blackberry DTEK 50 STH100-1 Service Manual page 20

L1 Service Manual
IV. Press "Pass" to continue;
V. Make a noise near the headset mic, you will hear it from headset if it functions well;
VI. Press "Pass" to continue;
VII. Remove headset according to the instruction and press "Pass" to continue.

FM
I. Insert headset according to the instruction and you will hear FM playing and FM frequency
will be displayed on the screen if it functions well;
II. Press "Pass" to continue;
III. Remove headset according to instruction and press "Pass" to continue.

G-Sensor
I. Put the handset towards up according to instruction;
Press "Pass" to continue;
II.
III. Put the handset "FACE DOWN", "DOWN", "LEFT", "RIGHT" and "FACE UP" according to
instruction, and then the instruction will disappear if it functions well;
Press "Pass" to continue.
IV.

GyroScope
I. It will display "BIST test: OK" and you can get some value such as Vx, Vy, Vz, dx, dy, dz if it
functions well;
Press "Pass" to continue.
II.

E-Compass
I. Please move the phone is an 8 shape according to the instruction;
II. Press "Pass" to continue;
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Neon PRD62980/62981 Level 1 Service Manual
TCL
Communication Ltd.
Page
20/30