Blackberry DTEK 50 STH100-1 Service Manual page 16

L1 Service Manual
Press *#2886# in dial screen and then you will see the interface displaying the SW version. Select
"Auto" to start the auto test, or select "MANU" to do the MMI test manually.
If one of the tests failed during "Auto" test mode, it will show "Failed: XXX", press "Next" to go on test
and press "END" to power off.

Traceability
I. You can get some information such as IMEI, CU-REF, PTM, Date Code, etc.
Press "Pass" to continue.
II.

SMARTPA CAL
I. It will running the test automatically and show "TOP OK; BOTTOM OK; SmartPA Test PASS"
if it functions well;
Press "PASS" to continue.
II.

Speak Box
It will run the test automatically and show "TOP OK;BUTTOM OK"; SpeakerBox Test
I.
PASS if it functions well
Press "Pass" to continue;
II.

Raw Data
I. It will running the test automatically, don't touch the screen during test and it will show "Pass"
if it functions well;
Press "PASS" to continue.
II.

Touch Panel
I. "Please draw on the yellow area" according to instructions;
Press "Pass" to continue.
II.

LCD
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Neon PRD62980/62981 Level 1 Service Manual
TCL
Communication Ltd.
Page
16/30