Display Items; Repeat And Shuffle Play; Radio; Storing And Receiving Stations - Sony CDX-R3310 Operating Instructions Manual

CD
For details on connecting to a CD/MD changer,
see page 11.

Display items

A
A Source
B Track number/Elapsed playing time,
Disc/artist name, Group number*
Group name, Track name, Text
information*
*1 Group number is displayed only when the group is
changed.
*2 When playing an MP3, ID3 tag is displayed and
when playing a ATRAC CD, text information written
by SonicStage, etc is displayed.
To change display items B, press (DSPL);
scroll display items B, press (SCRL) or set
"A.SCRL-ON" (page 10).
Note (CDX-R30M only)
When an ATRAC CD is played on the unit, optional
RM-XM10 may not display track numbers after 512
correctly. However, this is not a malfunction.
Tip
Displayed item will differ, depending on the disc type
and recorded format. For details on MP3, see
page 13; ATRAC CD, see page 14.

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select To play
REP-TRACK track repeatedly.
REP-GP* group repeatedly.
SHUF-GP* group in random order.
SHUF-DISC
disc in random order.
* When an MP3/ATRAC CD is played.
To return to normal play mode, select "REP-
OFF" or "SHUF-OFF."
8
B
, Clock
2

Radio

Storing and receiving
stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
,
1
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, AM1 or AM2.
2
Press and hold (BTM) until "BTM"
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previous stored station will be replaced.

Receiving the stored stations

1
Select the band, then press a number
button ((1) to (6)).
With the card remote commander
To select preset stations, press M or m.

Tuning automatically

1
Select the band, then press (SEEK) +/–
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) +/– to locate the
approximate frequency, then press (SEEK) +/–
repeatedly to fine adjust to the desired frequency
(manual tuning).