Receiving A Station Through A List - List-Up; Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics - Bal/Fad/Sub - Sony CDX-R3310 Operating Instructions Manual
Sony fm/am compact disc player operating instructions cdx-r3310, cdx-r30m
Hide thumbs
Also See for CDX-R3310:
- Installation/connections (2 pages) ,
- Operating instructions manual (30 pages) ,
- Service manual (48 pages)
Table of Contents
Advertisement
Available languages
Available languages
Receiving a station through a
list — list-up
You can list up the frequency or the name. For
details on labeling a station, see page 10.
1
Select the band, then press (LIST).
The frequency or station name appears.
2
Press (LIST) repeatedly until the
desired station appears.
After 5 seconds, the unit returns to normal
reception mode.
3
Press (SEEK) +/– to receive the
station.
With the card remote commander
In step 2, to select the station, press M or m.
Other functions
Changing the sound
settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press (SEL) repeatedly until “BAL,”
“FAD” or “SUB” appears.
The item changes as follows:
t MID*
t HI*
t
LOW*
1
1
1
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
2
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB”
(page 10).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2
Press the volume +/– button
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press <, M, ,
or m.
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press (EQ3)
repeatedly to select the EQ3 type.
2
Press (SEL) repeatedly until “LOW,”
“MID” or “HI” appears.
3
Press the volume +/– button
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
continue to next page t
Page 9
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
