Using Optional Equipment; Cd/Md Changer; Card Remote Commander Rm-X114 - Sony CDX-R3310 Operating Instructions Manual

LPF* 2
(Low To select the cut-off frequency
Pass Filter) "78HZ," "125HZ" or "OFF"
( ).
z
*1 When the unit is turned off.
*2 When the audio output is set to "SUB."

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number Disc number
Playback starts.
Note (CDX-R30M only)
When an XM satellite radio program is received by the
optional XM tuner, optional RM-XM10 may not display
source name and channel number correctly. However,
this is not a malfunction.
Skipping groups and discs
1 During playback press (1)/(2) (GP/DISC)
–/+.
Press (1)/(2)
To skip
group and release (hold for a
moment).
group within 2 seconds of first
continuously releasing.
discs repeatedly.
discs then, press again within 2
continuously seconds and hold.
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select To play
REP-DISC* 1
disc repeatedly.
SHUF- tracks in the changer in random
CHGR* 1
order.
SHUF-ALL*
2 tracks in all units in random
order.
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select "REP-
OFF" or "SHUF-OFF."
Tip
"SHUF-ALL" will not shuffle tracks between CD units
and MD changers.
Locating a disc by name — list-up
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list. For details on labeling a disc, see
page 10.
1 During playback, press (LIST).
The disc number or disc name appears.
2 Press (LIST) repeatedly until the desired disc
appears.
After 5 seconds, the unit returns to normal
play mode.
3 Press (SEEK) +/– to play the disc.
With the card remote commander
In step 2, to select the disc, press M or m.
Card remote commander
RM-X114
Location of controls
The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
DSPL
DSPL
*
MENU
PRESET
SOURCE
SOURCE
</,
–
SEEK
(SEEK –/+ )
SOUND
PRESET –
OFF
OFF
VOL (+/ –)
continue to next page t
MODE
MODE
*
LIST
+
+
DISC
m/M
*
(DISC /
+
SEEK
PRESET
+/ –)
–
DISC
*
ENTER
ATT
+ ATT
VOL
–
11