Integrated Peripherals - MSI PM8M2-V Series Manual

MS-7071 M-ATX Mainboard

Integrated Peripherals

VIA OnChip PCI Device
Preess <Enter> and the following sub-menu appears:
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting
options: [Disabled], [All Enabled].
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system
that does not support or have any USB 2.0 driver installed, such as DOS and
SCO Unix. Setting options: [Disabled], [Enabled].
USB Emulation
This setting is used to enable/disable the USB legacy devices. Setting options:
[Off], [KB/MS], [On].
3-14