Table of Contents
Advertisement
Getting to know the appliance
en
Display panel
In the table you can find possible settings and information in the display panel;
these differ depending on the model.
Settings for the selected programme
Temperature in °C
— - 90*
- - - -, 0 - 1400*
Spin speed in rpm
(revolutions per minute)
1:30
Programme length
1 - 24
Finish in h (hours)
10 kg
Load in kg
* Depending on the model
Status indicators for the programme progress (programme sequence)
N, à, 0, End
Childproof lock
E
Door lock
Õ
Tap
r
Overdosage
Å
- - - - é*
* Depending on the model
22
Temperature
Maximum spin speed or - - - - (Rinse stop = no final drain,
washing remains in the water after the last rinse)
Depends on the programme selection in h: min (hours: min-
utes)
End of programme after ... Hours
Maximum load
Wash, rinse, spin/drain, programme end.
Lights up: The childproof lock is activated.
Flashes: The childproof lock is activated, and if the pro-
gramme selector has been adjusted or the buttons have been
pressed.
Lights up: When the door can not be opened.
Lights up: Water pressure is too low. This extends the pro-
gramme duration.
Flashes: The tap has not been turned on or there is no water
supply.
On if too much foam detected, one additional rinse cycle
switched on.
Power consumption.
Advertisement
Table of Contents
