The length of the program is
Note:
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
Program settings,
■
Detergent dosage (additional rinse
■
cycles if required due to foaming),
Load size/type of textiles (longer
■
washing for higher load and for
textiles which absorb more water),
Imbalances (e. g. due to fitted
■
sheets) are offset with several start-
ups of spin cycles,
Fluctuations in power supply,
■
Water pressure (infeeding speed).
■
Additional programme settings
\
Additional programme
settings
You can find possible additional
Note:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
Speed/Eco
(G/F Speed/Eco)
Button with two possible settings for
adapting the selected programme:
G Speed
■
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the Speed/Eco
setting.
Do not exceed the maximum
Note:
load.
F Eco
■
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the Speed/Eco
setting.
Select the button to do this. First of all,
you can select the G Speed setting. If
you select the button again, the F Eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you select the button again, no setting
is active.
en
31