Advertisement
6. maintenance
6.1.
General maintenance
6.1.1.
ensure the machine is unplugged from the power supply.
6.1.2.
disconnect the hose from the unit.
6.1.3.
undo the clasps and remove motor head from the drum.
6.1.4.
Withdraw filter (see 6.2 for cleaning directions).
6.1.5.
clear out any dirt or debris from the drum and hose.
6.1.6.
clean the body (inside and out) by washing it in a mild soapy solution. dry thoroughly.
clean the machine head (inside and out) using a damp cloth. dO nOt over-moisten.
6.1.7.
6.1.8.
check the power cable to make sure that it is not damaged.
6.2.
clOtH Filter maintenance
6.2.1.
Handle the filter carefully when cleaning, drying or installing.
6.2.2.
With machine head removed carefully remove the filter and inspect for damage. A filter that has small tears or holes in it will not
perform efficiently and should be replaced.
6.2.3.
Use a soft brush to remove dust from the filter (both internal and external surfaces).
6.2.4.
Use tap or shower to rinse the filter. Work from inside to outside for a best results.
dO nOt attempt to dry the filter by using any form of direct heat i.e. air blower. Store the cleaned filter in a well ventilated place in
6.2.5.
order to air-dry only.
imPOrtant! iF tHe macHine iS uSed witHOut a Filter Fitted tHiS may cauSe damaGe tO tHe mOtOr and yOur
Guarantee will be invalidated.
7. trOubleSHOOtinG
cleaner will not operate.
dust comes from motor cover.
reduced efficiency and increased
motor speed / vibration.
envirOnment PrOtectiOn
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson way, Suffolk business Park, bury St edmunds, Suffolk. iP32 7ar
01284 757500
© Jack sealey limited
no power supply.
faulty power cable, switch or motor.
container full of liquid.
filter missing or damaged.
container full.
filter clogged.
nozzle, hose or container inlet blocked.
01284 703534
sales@sealey.co.uk
Original Language Version
check supply.
check and repair or replace faulty item.
empty container.
fit or replace filter.
empty container.
clean or replace filter.
check nozzle, hose and container inlet for
blockage.
www.sealey.co.uk
PC102, PC102HV Issue 1 12/12/17
Advertisement
