Forced Cooling Operation - Daikin FTXR-T Series Service Manual

Forced Cooling Operation

2. Forced Cooling Operation

Outline
The forced cooling operation is allowed when both the following conditions are met.
1. The outdoor unit is not abnormal and not in the 3-minute standby mode.
2. The outdoor unit is not operating.
Protection functions have priority over all other functions during forced cooling operation.
Details
 With indoor unit ON/OFF switch
Press indoor unit ON/OFF switch for at least 5 seconds. The operation will start.
Forced cooling operation will stop automatically after about 15 minutes.
To stop the operation, press indoor unit ON/OFF switch.
 With the indoor unit's remote controller
1. Press Mode button and select the cooling operation.
2. Press On/Off button to turn on the system.
3. Press Temp,  buttons and Mode button at the same time.
4. Press Temp,  buttons, select "T", and press Mode button for confirmation.
126
Forced cooling operation will stop automatically after about 30 minutes.
To stop the operation, press On/Off button.
1, 3, 4
Indoor unit
ON/OFF switch
4
2
3, 4
Part 7 Trial Operation and Field Settings
SiUS041829E
R7000226
R7000227