Maintenance Procedures; Introduction; Section 3 Maintenance Procedures - Genie GTH-636 Maintenance Manual

September 2016
Section 3 Maintenanc e Proc edures
Intr oducti on
Observe and Obey:
 Maintenance inspections shall be completed
by a person trained and qualified on the
maintenance of this machine.
 Scheduled maintenance inspections shall be
completed as specified on the
inspection Reports
of periodic examinations and tests may also
depend on national regulations.
Failure to perform each
procedure as presented and
scheduled may cause death,
serious injury or substantial
damage.
 Immediately tag and remove from service a
damaged or malfunctioning machine.

Repair any machine damage or malfunction
before operating the machine.

Use only Genie approved replacement parts.
 Machines that have been out of service for a
period longer than 3 months must complete the
quarterly inspection.
Part No. 1272858
Maintenance
. The frequency and extent
Genie Telehandlers

Maintenance Procedures

Machine Configuration:
 Unless otherwise specified, perform each
procedure with the machine in the following
configuration:
• Machine parked on a firm, level surface
• Boom in the stowed position
• Key switch in the off position with the key
removed
• Wheels chocked
Maintenance Manual
19