Suzuki Wagon R Manual page 202

6) Install wheel and tighten wheel nuts to specified torque.
Tightening Torque
.
(a): 85 N m (8.5 kg-m, 61.5 lb-ft)
7) Lower hoist and vehicle in non-loaded condition, tighten absorb-
er lower bolt (1) and lateral rod body side nut (2) to specified
torque.
Tightening Torque
.
(a): 90 N m (9.0 kg-m, 65.0 lb-ft)
.
(b): 63 N m (6.3 kg-m, 45.5 lb-ft)
BUMP STOPPER
REMOVAL
1) Hoist vehicle and remove rear wheel.
2) Remove bump stopper using flat tip screwdriver.
INSTALLATION
1) Install bump stopper.
NOTE:
Before installing bump stopper apply soap water on it.
2) Install wheel and tighten wheel nuts to specified torque.
Tightening Torque
.
85 N m (8.5 kg-m, 61.5 lb-ft)
REAR SUSPENSION 3E-9