3B-10 MANUAL RACK AND PINION
7) Reinstall cover (1) removed previously to steering shaft joint.
8) Put back floor mat as it was.
9) Install both wheels and tighten wheel nuts to specified torque.
Tightening Torque for wheel nuts:
.
85 N
m (8.5 kg-m, 61.5 lb-ft)
10) Lower hoist.
11) Check toe setting. Adjust as required (Refer to Section 3A
FRONT END ALIGNMENT).
12) Tighten both tie rod end lock nuts to specified torque.
Tightening Torque
.
(a): 45 N
m (4.5 kg-m, 32.5 lb-ft)