Suzuki Wagon R Manual page 898

WINDOWS, MIRRORS, SECURITY AND LOCKS 8D-7
INSTALLATION
1) Connect wiper and washer switch lead wire coupler.
2) Push wiper and washer switch assembly into steering column till
it clicks.
3) Install steering column cover. Reverse removal procedure.
FRONT WIPER MOTOR
INSPECTION
1) As illustrated, use a 12 V battery to connect its (+) terminal to ter-
minal "A" and its (–) terminal to bracket (1) (wiper ground).
If motor (2) rotates at a low revolution speed of 45 to 55 rpm, it
is proper. For high speed check, connect battery (+) terminal to
terminal "B", and its (–) terminal to bracket (1) (wiper ground). If
motor (2) rotates at a high revolution speed of 67 to 83 rpm, it is
proper.
2) Testing automatic stop action.
a) Connect 12 V battery (+) terminal to terminal "A" and its (–)
terminal to bracket (1) (wiper ground), and let the motor (2)
turn.
b) Disconnect terminal "A" from battery, and let the motor (2)
stop.
c) Connect terminal "A" and "D" with a jumper wire (3), and con-
nect terminal "C" to battery (+) terminal. Observe the motor
(2) turns once again then stops at a given position.
d) Repeat a) thru c) several times and inspect if the motor (2)
stops at the given position every time.