Fuel Injector - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 37 ページ ２０１２年１月１７日 火曜日 午後３時４８分

11.Fuel Injector

A: REMOVAL
1. RH SIDE
1) Release the fuel
FU(H4DOTC)-55, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
2) Disconnect the ground cable from the battery.
3) Open the fuel filler flap lid, and remove the fuel
filler cap.
4) Remove the air cleaner upper cover and air in-
take boot. <Ref. to IN(H4DOTC)-10, REMOVAL,
Air Cleaner Case.>
5) Remove the air cleaner element.
6) Remove the coolant filler tank. <Ref. to
CO(H4DOTC)-35, REMOVAL,
Tank.>
7) Remove the power steering pump.
(1) Remove the
ME(H4DOTC)-44, REMOVAL, V-belt.>
(2) Disconnect the power steering switch con-
nector.
Fuel Injector
pressure. <Ref. to
FU-00009
Coolant Filler
front V-belt. <Ref. to
FU-00017
FU(H4DOTC)-37
FUEL INJECTION (FUEL SYSTEMS)
(3) Remove the bolts which install the power
steering pipe bracket to the intake manifold.
NOTE:
Do not disconnect the power steering hose.
(4) Remove the bolts, which install power steer-
ing pump bracket.
(5) Remove the reservoir tank from the bracket
by pulling it upward.
(6) Place the power steering pump on the right
side wheel apron.
ME-00036
FU-00019
FU-02572
FU-00021