Table of Contents
Advertisement
23 - 166
WEATHERSTRIP/SEALS
FRONT DOOR HEADER
WEATHERSTRIP
REMOVAL
(1) Open front door.
(2) Using a trim stick C-4755 or equivalent, disen-
gage the plastic pins attaching front door header
weatherstrip to door frame (Fig. 3).
(3) Remove weatherstrip from door.
INSTALLATION
(1) Place weatherstrip into position.
(2) Press on attaching plastic pins to engage front
door header weatherstrip to door frame (Fig. 3).
(3) Close front door.
FRONT DOOR OPENING
WEATHERSTRIP
REMOVAL
(1) Open front door.
(2) Remove front door sill scuff plate.
(3) Pull front door weatherstrip from door opening
fence (Fig. 1) and (Fig. 4).
(4) Remove door opening weatherstrip from vehi-
cle.
1 - B-PILLAR STARTING POINT
2 - VERIFY INSTALLATION OF A-PILLAR CORNER AND
BELTLINE
Fig. 4 FRONT DOOR OPENING WEATHERSTRIP
Fig. 3 DOOR HEADER WEATHERSTRIP
1 - FRONT DOOR WEATHERSTRIP
2 - DOOR ASSEMBLY
3 - CHANNEL STUFFER
INSTALLATION
(1) Place front door opening weatherstrip into posi-
tion starting at the upper rear corner of the B-pillar
(Fig. 1) and (Fig. 4).
(2) Work the weatherstrip down the B-pillar to the
floor pan. Leave slack to ensure completion of the
weatherstrip throughout the entire opening.
3 - FRONT DOOR OPENING WEATHERSTRIP
CS
Advertisement
Table of Contents
