Mazda CX-9 Grand Touring 2009 Manual page 28

module terminal 1 A, SAS control module
terminal 1N and passenger-side air bag module
terminal 1B for the following:
Short to ground
Short to power supply
Open circuit
Is the wiring harness normal?
DTC B1049, B1881, B1882, B1883, B1886
DTC B1049, B1881, B1882, B1883, B1886 DETECTION CONDITION AND POSSIBLE CAUSE
B1049 Passenger-side pre-tensioner seat belt and other air bag module circuits short
B1881 Passenger-side pre-tensioner seat belt circuit resistance high
DTC B1882 Passenger-side pre-tensioner seat belt circuit short to power supply
B1883 Passenger-side pre-tensioner seat belt circuit short to body ground
B1886 Passenger-side pre-tensioner seat belt circuit resistance low
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
Resistance other than 1.0-9.7 ohms detected in passenger-side pre-tensioner seat belt
circuit
Malfunction in wiring harness between passenger-side pre-tensioner seat belt and SAS
control module
Open or short circuit in wiring harness between passenger-side pre-tensioner seat belt
Passenger-side pre-tensioner seat belt malfunction
No Replace the air bag wiring harness.
and SAS control module
SAS control module malfunction