Actuator Position Sensor Circuit - Toyota Camry Manual

BE–196
DTC 13 Actuator Position Sensor Circuit
CIRCUIT DESCRIPTION
CIRCUIT DESCRIPTION
This circuit detects the rotation position of the actuator control plate and sends signal to the ECU.
Code No.
Position sensor detects abnormal voltage.
Position sensor signal value does not change
when the motor operates.
DIAGNOSTIC CHART
Check voltage between terminals VR2
and VR3 of cruise control ECU
connector.
Check actuator position sensor.
Check harness and connector between
cruise control ECU and actuator
position sensor.
Check harness and connector for loose
connection. If connection is normal,
check and replace Cruise Control ECU.
WIRING DIAGRAM
BE39
BODY ELECTRICAL SYSTEM
Diagnosis
– CRUISE CONTROL SYSTEM
Trouble area
Cruise control actuator Position sensor.
Harness or connector between actuator
position sensor and body ground.
ECU
Proceed to next circuit
inspection shown on matrix
chart (See page BE–178).
Replace actuator assembly.
Replace or replace harness or
connector.