Toyota Camry Manual page 286

AX–46
AUTOMATIC TRANSAXLE
(b) Remove the 2 O–rings from the piston.
6. IF NECESSARY, REMOVE OIL SEAL RINGS
Remove the 2 oil seal rings from the shaft.
FORWARD CLUTCH INSPECTION
1. INSPECT CLUTCH PISTON
(a) Check that the check ball is free by shaking the piston.
(b) Check that the valve does not leak by applying lowpres-
sure compressed air.
2. INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surfaces of the discs, plates and
flange are worn or burnt. If necessary, replace them.
HINT:
S
S
FORWARD CLUTCH ASSEMBLY
1. INSTALL OIL SEAL RINGS
Install the 2 oil seal rings to the shaft.
NOTICE: Do not spread the ring ends more than necessary.
HINT: After installing the oil seal rings, check that they
move smoothly.
– FORWARD CLUTCH
If the lining of the disc is peeling off or discolored, or
even if a part of the printed numbers are defaced, re-
place all discs.
Before assembling new discs, soak them in ATF for
at least 15 minutes.
AX0FC–02
AX0FD–02