Various Messages - Korg Trinity Parameter Manual

Various messages

Various messages
A
Audio tracks were skipped
Situation: On a TRINITY series instrument which does not have the HDR-TRI option, you
B
Battery Low
Situation: The internal battery has run down.
Action:
C
Can't Calibrate
Situation: Calibration could not be performed correctly.
Action:
Completed
Situation: This will appear after a command has been successfully executed.
D
Destination and source are identical
Situation: When copying or bouncing, the same song, track, or pattern was selected for both
Action:
Destination is empty
Situation: When editing, the track or pattern specified as the destination contains no musical
Action:
Destination measure is empty
Situation: When editing, the measure specified as the destination contains no data.
Action:
Destination song is empty
Situation: The song specified as the copy or bounce destination does not exist.
Action:
Destination start measure within the limits of source
Situation: When using the Move Measure operation for All Tracks or within the same track, the
Action:
Directory not empty
Situation: When you attempt to erase a directory, one or more files or another directory may exist
Action:
E
Error in formatting medium
Situation: When attempting to format a floppy disk on the Trinity, a faulty sector was found on
Action:
160
attempted to load a file that included an audio track, and the data was loaded without
the audio track.
Be sure to contact your dealer or a Korg service center.
Try the command once again.
source and destination.
Select a different song, track, or pattern for the source and destination.
data.
Specify a track or pattern that contains musical data.
Specify a measure that contains data as the destination.
Before copying or bouncing, execute Create New Song in the dialog box that appears
when you select a new song.
specified destination measure is within the source measures.
Specify a destination measure that does not fall within the source.
within the directory.
Erase all files or directories within the directory.
the disk, so formatting was not possible.
Use a different floppy disk.