Korg Trinity Parameter Manual page 135

8–1c: Return 1/2
Adjusts the level of the audio signals sent from [Modulation] and [Reverb/Delay] to output jacks
1/L/MONO and 2/R.
The audio signals from Pan L and R will be mixed with the Effect 1 output adjusted by these
Return 1 and 2 levels, and output from output jacks 1/L/MONO and 2/R.
8–1d: Low/High Gain
Adjusts the tonal character of the audio signal that is output from output jacks 1/L/MONO and
2/R. The units are in [dB].
Low Gain
Adjusts the level of the low frequency range.
High Gain
Adjusts the level of the high frequency range.
Page Menu Command
8–1A: Memory Status
This command displays the remaining amount of sequencer memory.
8–1B: Copy Master Effect
This command copies master effect settings from a specified program, combination or song to the
master effect of the currently selected song.
8–1: Master Effects
[0...127]
[–18.0...+18.0]
[–18.0...+18.0]
127