Specifications - Yaesu FT-450/D Technical Supplement

Specifications

General
Rx Frequency Range:
Tx Frequency Ranges:
Frequency Stability:
Operating Temperature Range:
Emission Modes:
Frequency Steps:
Antenna Impedance:
Power Consumption:
Supply Voltage:
Dimensions (WxHxD):
Weight (approx.):
Transmitter
Power Output:
Modulation Types:
Maximum FM Deviation:
Harmonic Radiation:
SSB Carrier Suppression:
Undesired Sideband Suppression:
Audio Response (SSB):
3rd-order IMD:
Microphone Impedance:
SPECIFICATIONS-1
30 kHz - 56 MHz (operating)
160 - 6 m (specified performance, Amateur bands only)
160 - 6 m (Amateur bands only)
±1 ppm/hour (@+25 °C, after warmup)
14 °F ~ 122 °F (–10 °C ~ +50 °C)
A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM), F2D (DTMF TONE)
10 Hz (SSB & CW), 100 Hz (AM & FM)
50 Ohms, unbalanced
Rx (signal present) 1.5 A
Tx (100 W)
DC 13.8 V ± 10%
9" x 3.3" x 8.5" (229 x 84 x 217 mm)
FT-450: 7.9 lb (3.6 kg)
100 watts (25 watts AM carrier)
J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
±5.0 kHz / ±2.5 kHz
Better than –60 dB (160 - 10m Amateur bands)
Better than –70 dB (6m Amateur band)
At least 60 dB below peak output
At least 60 dB below peak output
Not more than –6 dB from 400 to 2600 Hz
–31 dB @14 MHz 100 watts PEP
600 Ohms (200 to 10 kOhms)
22 A
FT-450D: 8.8 lb (4.0 kg)
FT-450 Series Technical Supplement