Activating Ip Masquerading - Siemens SCALANCE S615 Getting Started

OpenVPN tunnel between SCALANCE S615 and SINEMA RC Server
2.2 Configuring access to the SINEMA RC Serve
2.2.2

Activating IP masquerading

IP masquerading is used so that the internal IP addresses are not forwarded to external. In
addition to this, no further routing settings are necessary on the router.
Procedure
1. Click on "Layer 3" > "NAT" in the navigation area and on the "Masquerading" tab in the
content area.
2. Select "Enable Masquerading" for vlan2.
3. Click "Set Values"
Result
Masquerading is activated on the WAN port vlan2. When a packet is sent via this interface,
the source address is translated to the IP address assigned to vlan2.
30
SCALANCE S615 Getting Started
Getting Started, 03/2015, C79000-G8900-C390-01