Zoom F4 Supplementary Manual page 10

Input limiter
Setting the target level
When the limiter On/Off setting is set to On (Advanced), use
this to set the target output level for the signal.
5.
Use e to select
, and press E .
Level
6.
Use e to adjust the setting,
and press m.
HINT
• This can be set from −16 to 0 dBFS.
• After a signal passes through the limiter, it will not exceed the set
target level value.
NOTE
This setting becomes available when On/Off is set to On (Advanced).
10
(continued)
Target