Setting The Input Source (Input Source) - Zoom F4 Supplementary Manual

Setting the input source (Input Source)

Follow these procedures to set the input source of each track.
1.
Press m.
2.
Use e to select
press E
3.
Use e to select
, and press E .
Source
4.
Use e to select a track, and
press E .
04
INPUT
, and
Input
HINT
Select ALL to set all the tracks at the same time.
5.
Use e to select the input
source, and press E .
Setting value
This treats signals input through INPUT 1–4 as input
Analog Input
signals.
USB 1, USB 2,
When AIF with Rec (→ P .19) is set to On,
USB 3, USB 4
computer output signals are treated as input signals.
NOTE
• The Input Source cannot bechanged for Inputs 5 and 6.
• When dual channel recording is enabled the Input Sourcecannot
be changed for the dual channel recording tracks.
Explanation