Zoom F4 Supplementary Manual page 20

Using SD card recording and audio interface functions at the same time (AIF with Rec)
NOTE
• The F cannot operate on USB bus power. Use the internal
batteries, the dedicated AC adapter or an external DC power
supply to power it.
• AIF with Rec cannot be used with the following settings and
functions.
- Sampling rate settings other than 44.1/48 kHz
- The format of Ambisonic Mode other than Off, FuMa, AmbiX,
and Ambisonics A.
- SD Card Reader
- Audio Interface
-
• A driver is necessary for use with Windows. Download the driver
from the ZOOM website (www.zoom.co.jp/). Driver not required
for Mac.
• When AIF with Rec is set to On, the sampling rate cannot be
changed.
• When AIF with Rec is set to On, files with sampling rates that
differ from the F setting cannot be played.
• Set the input source to USB1–4 (
→
routing ( P13) to monitor sound played back from the computer.
• When AIF with Rec is set to On, the F latency will increase 2
ms. When monitoring sounds being recorded with a mic in real-
time, increased latency can cause interference between sound
transmitted through the air from the source and the delayed
monitored sound, possibly making accurate monitoring of the
sounds difficult.
20
→
P4) or set USB1–4 to the output
Disconnecting
1.
Press m.
2.
Use e to select
Off
press E .
3.
Disconnect the cable from the computer and the
F
.
NOTE
Specification of AIF with Rec
• Class: USB2.0 High Speed
• Sampling rate: 44.1/48 kHz
• Bit rate: 16/24-bit
• 8IN/4OUT
(continued)
, and