Setting the release time
This sets the amount of time until limiting stops after the
input signal goes below the threshold.
5.
Use e to select
Release
, and press E .
Time
6.
Use e to adjust the time,
and press m.
HINT
• Limiter operation is linked for tracks that have stereo link or MS
stereo link enabled. If the signal for either linked channel reaches
the threshold, the limiter will operate on both tracks.
• When the limiter is operating, the right-most segment of the
level meter and the mixer limiter indicator on the display light.
NOTE
This setting can be made when On/Off is set to On (Normal).
F
Multi Track Field Recorder
09