Onkyo TX-NR696 Instruction Manual page 80

• DSD audio signals cannot be output to ZONE 2 with the "NET" input selector.
• If ZONE 2 is on, power consumption during standby will increase.
• If ZONE 2 is turned on when the Pure Audio listening mode is selected in the
main room, the mode will automatically switch to the Direct listening mode.
(European, Australian, Taiwanese and Asian models)
To disable the function: While pressing and holding the ZONE 2 SHIFT button
on the remote controller, press . Alternatively, press the OFF button on the main
unit.
Contents Connections
≫
80
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫