Airplay; Playing Back On This Unit - Onkyo TX-NR696 Instruction Manual

AirPlay

®
By connecting this unit to the same network as that of iOS devices such as iPhone
• Update the OS version on your iOS device to the latest version.
• Depending on the iOS version, operation screens or operation procedures on the iOS device may be different. For details, refer to the operating instructions for the
iOS device.

Playing Back on This Unit

Wi-Fi
iPhone
Onkyo TX-NR696 XXXXXX
Contents
≫
, iPod touch
®
1. Connect the iOS device to the access point where this unit is connected via
network.
2. Tap the AirPlay icon
iOS device, and select this unit from the displayed devices.
3. Play the music file on the iOS device.
• When "5. Hardware" - "Power Management" - "Network Standby" is set to
"Off" in the Setup menu, turn this unit on manually, and press the NET button
on the remote controller. In the factory default setting, the Network Standby
function (
• Due to the characteristics of AirPlay wireless technology, the sound produced
on this unit may slightly be behind the sound played on the AirPlay-enabled
device.
You can also play the music files on a PC with iTunes (Vere. 10.2 or later)
equipped. Confirm that this unit and the PC are connected to the same network
beforehand. Then, press NET on this unit. Next, click the AirPlay icon
iTunes, select this unit from the displayed devices, and start play of a music file.
e.g., iOS 10
56
Connections
≫
and iPad , you can enjoy music files on iOS devices wirelessly.
® ®
on the play screen of the music play application on the
p131) is set to On.
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫
in
≫