Onkyo TX-NR696 Instruction Manual page 113

4. Source 1. My Input Volume
2. Name Edit
Audio Select
Video Select
5. Hardware 1. HDMI
2. Network
3. Bluetooth
4. Power Management
5. Works with SONOS
6. Multi Zone 1. Zone 2
2. Remote Play Zone
7. Miscellaneous 1. Tuner
2. Remote ID
3. Firmware Update
4. Initial Setup
5. Lock
6. Factory Reset
Contents
Set a volume value for each input selector.
Set an easy name for each input.
Select the prioritized input terminal when multiple audio sources are connected to one input
selector.
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which
video is displayed on the TV.
Change the settings for the HDMI functions.
Change the settings for the Network functions.
Change the settings for the Bluetooth function.
Change the settings for the power-save function.
Change the settings to connect with the Sonos Connect.
Change the settings for Zone 2.
Change the settings for remote play.
Change the frequency step for the tuner.
Change the remote controller ID.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
All the settings are restored to factory defaults.
113
Connections
≫ ≫
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫
p125
p125
p126
p126
p127
p128
p130
p131
p132
p133
p133
p133
p133
p134
p134
p134
p134
≫