7. Network Bridge Function
This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
By making use of the NETWORK BRIDGE function, a computer connected to the
projector via wireless or wired LAN is able to control an external device via
RS-232C communication using the projector as a network device.
Computer
LAN port or HDBaseT port
7.1 Connecting devices
1) Connect the projector's LAN port to the computer's LAN port with a LAN cable,
or connect the wireless adapter to the WIRELESS port.
2) Connect the projector's CONTROL port and the device's RS-232C port with an
RS-232C cable, for RS-232C communication.
NOTE
• Before connecting the devices, read the manuals for the devices to
ensure the connection. For RS-232C connection, check the specifications of
each port and use the suitable cable. (
Guide - Technical)
• When OPTION - SERVICE - CONTROL TERMINAL - WIRED NETWORK is set
to HDBaseT, connect LAN cable to HDBaseT port on the projector.
Wireless
LAN
TCP/IP data
Wired LAN
LAN cable
Protocol change
RS-232C cable
CONTROL port
WIRELESS
(Wireless adapter)
Connection to the ports in the Operating
85
7. Network Bridge Function
Serial data
RS-232C
External device
port
QM00193 - 2